Cellphone Network Booster

Cellphone Network Booster


1.MINI DCS 1800mhz mobile signal booster. 2.Boost signal which with frequency 1800MHz. 3.Coverage 500sqm very good use for home/office. 4.Very easy setup and improve your signal quality.

Product Details

cellphone network booster



Cellular repeater - a device designed to expand the coverage of a signal and provide a stable signal in places where it is poorly captured or completely absent. Often, instead of the word "repeater" are used synonyms: cellular amplifier, GSM repeater, GSM amplifier, cellular amplifier.

Our amplifiers are suitable for a country house, a dacha, a basement and a basement ... And it is important - some minimal signal must be present initially, the repeater does not create a signal, but only enhances the existing one !!! You can check the presence of a signal using the Netmonitor program - download it in Google Play or Appstore.


Mobile phone operators all over the world render 4G data services at different LTE frequency standards. For most European networks it’s LTE 1800 MHz, this frequency is very popular used all over the world.

Here’s below the catalogue of all 4G boosters we offer. The devices boost 4G connections and ensure reliable 4G networks coverage. The models operate at different frequencies so that customers from any country and subscriber of any mobile provider could find the most suitable option for their requirements.

If you need to improve both 4G signal and voice calls, have a look at dualband GSM + 4G amplifier kits. These repeater sets amplify mobile signal at 1800 Mhz frequencies at a time and guarantee not only strong 4G, but also 2G/GSM phone signal for voice calls and internet.

To find a suitable 4G Booster for home or working place in 3 steps, use a Search form below. Select your country and coverage, and click your provider icon to see the matching LTE phone boosters.

How Can I Solve Poor 4G Signal Problem with a 4G Signal Booster?

There is an easy way to put an end to the problems due to bad quality of network. Boosters offered by Wingstel.com will work for improvement of mobile signal in the places with bad reception. All amplifier sets come with all necessary components and are ready-to use.


Frequency RangeUL: 1710-1785MHz  

DL: 1805-1880MHz
GainUL: 60±3dBi

 DL: 65±3dBi
Export Power17dBm±3dBm  
Power SupplyInput AC100V-240V 50/60Hz 
Output 5V 2000mA
Size163 x 108 x 19mm 
Coverage Area500㎡
Pass Band Ripple≤3dBi
I/O Impedance50Ω
Connector TypeN female connector 
Noise Figure≤4dBi 
Transmission Delay≤0.5μs 
Ambient Temperature-10ºC~60ºC 
ReliabilityTo the GB6993-86 standard 
Electromagnetic CompatibilityTo the ETS300 694-4 standard 
Functiona) Power supply LED denote 
b) Export power LED denote 

output power

The greater the power of the repeater, the more coverage it can provide. Accordingly, the larger the object, the larger the repeater output power needed. When choosing a repeater, it is necessary to take into account the material of the walls and floors, the configuration of the premises, the presence of cellular signals at the facility and the location of the base stations relative to the facility.

Almost all manufacturers of communication amplifiers in the technical characteristics for each model of the repeater indicated the maximum coverage area, for example, up to 1500 square meters. This value represents the maximum possible service area of the repeater in the absence of any obstacles to the propagation of the signal. To determine the actual coverage area, it is necessary to divide the value of this parameter by 3, and if it is necessary to have some power reserve, then by 5.



Accessories needed:


Antenna types

Panel-type antennas (sector) have an effective angle of signal emission from 12˚ to 120˚. The back wall of such an antenna is made of shielding material that blocks the radiation of the signal in this direction. The front part of the antenna is made of radio transparent plastic. The "pluses" of antennas of this type include high power, resistance to wind loads, ease of installation.

Antenna type "wave channel" (directional) have many varieties that differ from each other in length, total number of elements, polarization planes and appearance. Antennas of this type have the common world name "Uda-Yagi". Antenna received widespread because of the availability, practicality and relatively low prices.

Whip-type antennas are based on a rigid metal rod, which can be solid or consist of several fragments. Whip antennas are used to receive and transmit cellular signals in various directions, have small dimensions and weight, but lose to other types of antennas in gain.

Some panel and whip antennas are designed for indoor use only, they are also called “internal” or “service”. Antennas in hermetic design are used both inside and outside the premises, they are called "street" or "donor".

If you're in need of quality and cheap cellphone network booster, please rest assured to wholesale our effective equipment made in China. We're one one of the most professional Cell Phone Boostermanufacturers and suppliers in China, also supporting quality customized service. Welcome to contact our factory for more info.
Hot Tags: cellphone network booster, China, factory, manufacturers, suppliers, wholesale, customized, cheap, made in China


Related Products