Household Wireless 4G LTE Cellular Signal Booster

Household Wireless 4G LTE Cellular Signal Booster Household Wireless 4G LTE Cellular Signal Booster provides the ultimate solution in any area where cellular communications can not work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor...

Product Details

Household Wireless 4G LTE Cellular Signal Booster 

● Automatically operates at maximum gain – no manual adjustments needed

● Extends phone battery life - phone uses less power when the indoor signal is stronger

● Easy to set up - all hardware included

● Improved indoor cellular voice and data signal


What is the capability of a cell phone booster?

There are lots of questions on working and success rate of cell phone booster, the favorite question is what a capability of a cell phone booster is. In regards with frequency and range, every cell phone booster has its own frequency to work on and area to serve. But one thing which is common in every signal booster is that it boost low signal strength, it do not make signal of its own. Yes, cell phone signal booster cannot give birth to new signals and can boost the signal strength. So, if there is minimum signal strength available then only cell phone booster can work.

Dual band CDMA/DCS 850/1800MHz cellphone amplifier Description:


Dual band CDMA/DCS 850/1800MHz Mobile Signal Booster Packing List: 





mobile signal booster C05-9.jpg

signal amplifier C04G-10.jpg

Company Information:

signal amplifier C04G.jpg

signal amplifier C04G-1(1).jpg

signal amplifier C04G-1(2).jpg

signal amplifier C04G-1(3).jpg


Signal Booster Accessories

While the cell phone booster kits from Wingstel come with everything that you need to setup and start boosting signal, there are a couple of accessories that we do recommend.

Lightning Protector Kit

The lightning protector kit is a surge protector for the amplifier that sits on the cable coming from the outside antenna and prevents any surges of electricity from traveling down the antenna cable and frying the amplifier. It is highly recommended for use with all signal booster kits.

Pole Mount

The yagi directional antenna that comes with most of the signal booster kits is meant to be mounted on a pole on the roof of the home. If you don't have an existing pole on the roof already, like an old television antenna, then a pole mount will provide you with a short length of pole to mount the directional antenna to.

Additional Antennas

For most homes, a single internal antenna should be sufficient to provide boosted signal throughout the house, but there are some situations which may require you to add a second inside antenna to the cell phone booster, such as if the house is a non-standard ship (L shaped or has an open courtyard inside), or if there are walls or floors made of concrete, brick, block or metal, which prevents signal from passing through. In these occasions, you may need to add a second internal antenna to the booster to better distribute the signal throughout the space.


Q: Does this signal repeater work without broadband internet? 

A: The signal repeater does not need broadband internet access to work. It's simply a cell phone signal booster, meaning that it boosts your cell phone signal inside. The way it does that is through an external antenna you mount outside connected to an amplifier inside, which then connects to an indoor antenna inside.  It has nothing to do with internet service. It is for increasing the cellular signal for cellular devices.

Q: We'd like to get rid of our telephone service/wireless service. Can this signal booster be hooked up to power a wireless modem? to power a pc? laptop? itunes? 

A: This cell phone signal booster is designed to take the cell phone and cellular data signal outside your home and bring it inside. Once that signal is inside, your devices that use the cellular networks will connect through it. If you want to power a wireless modem and power a PC etc, our new product will do for you. It can boost the phone signal and turn it to WIFI, which can share the internet from your carrier with PC, laptop and itunes etc. Please contact us for more information.

Q: Which app is recommended to check the signal strength? We live in a river canyon and can only get one bar on our deck.

A: You can go to the App Store and search for “cell signal” to find available apps for your device to check the signal strength.

When taking signal readings, move to the location where you want to take the reading, wait for 30 to 60 seconds for the signal readings to catch up, and then record the signal strength, carrier, and network type (2G, 3G, 4G, LTE, etc.).

Most phones have a setting we call Field Test Mode that can show you useful information about your phone, including the signal strength in decibels. 

The iPhone has a hidden built-in Field Test Mode app. To access it, follow these steps:

Go into Settings > WiFi and turn WiFi Off.

This will enable you to see what network you're connected to (2G, 3G, 4G, LTE, etc).

For iOS 9.3 and above: Go into Settings > Cellular > Cellular Data Options > Enable LTE and turn LTE to Off.

For iOS 9.2 and below: Go into Settings > Cellular > Enable LTE and turn LTE to Off.

LTE readings can be very different from previous networks so to best interpret the results, we ideally want signal readings from a previous generation network. You can also repeat the site survey with LTE enabled, just be sure to keep track of which readings are which.

Go into the Phone app and switch to the Keypad, as you would do to dial a phone number. Dial *3001#12345#* and press the Call button.

This will launch the Field Test Mode app and where the bars/dots were in the top left corner of the screen, you'll now see a negative number. The negative number is the decibel signal strength reading and should be followed by the carrier name and then the network type.

When taking signal readings, move to the location where you want to take the reading, wait for 30 to 60 seconds for the signal readings to catch up, and then record the signal strength, carrier, and network type (2G, 3G, 4G, LTE, etc.).

To exit and return your iPhone to normal status, all you need to do is hit the Home button. Also remember to go back into Settings and enable WiFi and Cellular LTE. This mode is available on any iPhone running iOS 4.1 and all later versions.

Android Field Test Mode

Accessing Field test mode on Android phones is also straightforward. You simply need to find your way to “Settings” > “About Phone”, and your numerical signal strength will be available under either Network or Status, depending on the model of the phone you own. There’s usually another option near the signal strength that says the Network Type.

If you're in need of quality and cheap household wireless 4g lte cellular signal booster, please rest assured to wholesale our effective equipment made in China. We're one one of the most professional 4G Cell Phone Boostermanufacturers and suppliers in China, also supporting quality customized service. Welcome to contact our factory for more info.


Related Products